General Purpose & Coated Gloves
Everyday gloves for handling, assembly and light construction. Knitted cotton gloves with PVC dots, like the Valpro KNSDA (single-side dots) and KNDDA (double-side dots), give good grip at low cost. Our polymer coated gloves, like the Valpro Flex Cool I microfoam and Gorilla Bull II latex gloves, add better grip and suit most daily jobs.
Cut Resistant Gloves
Cut resistant gloves protect against sharp edges from sheet metal, glass and blades. They are rated by cut level: the higher the level, the more protection. Our range includes the Valpro Cut 5 PU, Gorilla Cut 5 Microfoam and Flex Cut A4D, ideal for metal work, glass handling and fabrication.
Chemical Resistant Gloves
Chemical gloves keep oils, acids, solvents and cleaning chemicals off the skin. Our range includes the Valpro Chem II flock-lined nitrile glove and the Valpro Shield II and Shield Lite II PVC gloves. Nitrile suits oils and solvents; PVC suits acids and water-based chemicals.
Heat Resistant, Leather & Welding Gloves
These gloves protect against hot surfaces, sparks and molten metal. Leather welding gloves, like the Valpro Ranger Weld TIG Premium, give good feel for precise TIG work. Heavier leather gloves suit MIG and stick welding. Heat resistant gloves suit foundries, ovens and hot parts.
Disposable Gloves
Thin, single-use gloves for hygiene and light splashes. Used in food processing, labs, healthcare, cleaning and painting.
Cold Storage Gloves
Insulated gloves that keep hands warm and flexible at sub-zero temperatures. Used in freezer rooms, cold stores and ice plants.
We also stock glove accessories to keep your team’s hand protection complete.
Glove Materials Explained
- Cotton knit: Breathable and cheap. Good for light handling; adds grip with PVC dots.
- Nylon or polyester liner: Light and snug for good finger control.
- PU coating: Thin and flexible, great feel for small parts.
- Nitrile and microfoam nitrile: Good grip in oily conditions and resists oils. Microfoam is breathable.
- PVC: Resists acids and water-based chemicals; good for wet work.
- Leather: Tough and heat resistant; used for welding and heavy handling.
- HPPE and cut-resistant fibres: Strong yarns that resist cuts while staying light.
In Oman’s heat, choose breathable knitted gloves with a palm-only coating so the back of the hand stays cool.
How to Choose the Right Safety Gloves
- Identify the hazard: Cuts, chemicals, heat, sparks, cold or general wear.
- Check the rating: Match the EN 388, EN 374 or EN 407 rating to the hazard.
- Pick the coating: PU for feel, nitrile for oil grip, PVC for chemicals and wet work.
- Get the right size: Gloves that are too big reduce grip; too small tire the hands.
- Think about the heat: Choose breathable, palm-coated gloves for outdoor work.
- Check dexterity: Thinner gloves give better feel for small parts.
- Confirm the certification: Look for the CE mark and EN ratings on the glove or pack.
Care & When to Replace
- Check before use: Look for holes, cuts, tears, cracks or worn coating.
- Chemical gloves: Rinse before taking them off, and replace them if they swell, stiffen or change colour.
- Washable gloves: Some knitted and leather gloves can be washed. Follow the care label.
- Disposable gloves: Use once and throw away.
- Storage: Keep gloves dry and out of direct sun, which can weaken coatings and rubber.
Why Buy Safety Gloves from SAMS Solutions
- Huge range: Gloves for every hazard, from everyday handling to welding and chemicals.
- Certified products: CE marked gloves with EN ratings, and certificates on request.
- Ready stock: In stock in Deira, Dubai, with fast delivery to Oman.
- Wholesale prices: Better prices on dozens and cartons.
- Expert advice: We help you match the glove to the job.