Particulate Filters in Oman – 3M 2091, 2097 & 5N11 | SAMS Solutions

                    +971 56 414 5969      info@sams-solutions.com                                   Store Locator     Contact Us     Wishlist

Particulate Filters in Oman

Particulate filters in Oman fit onto reusable masks and stop dust, fumes and mists from reaching the lungs. They are used for welding, grinding, cutting, sanding and work with silica or lead dust. We stock genuine 3M 2091 and 2097 high-efficiency filters, 3M 5N11 prefilters and 3M filter retainers.

Request a Quote

Particulate Filters in Oman – 3M Dust & Fume Filters

Particulate filters in Oman fit onto reusable masks and stop dust, fumes and mists from reaching the lungs. They are used for welding, grinding, cutting, sanding and work with silica or lead dust. We stock genuine 3M 2091 and 2097 high-efficiency filters, 3M 5N11 prefilters and 3M filter retainers. SAMS Solutions offers wholesale prices from our Dubai stock and delivers to Muscat, Sohar, Duqm, Salalah and across Oman. Browse below or get a bulk quote on WhatsApp at +971 56 414 5969.

Types of Particulate Filters

High-Efficiency Filters (P100)

These filters clip straight onto a 3M reusable mask and stop at least 99.97% of airborne particles. P100 is the top US rating, similar to P3 in Europe.

  • 3M 2091: A light, pink “pancake” filter for dust, fumes and mists, including silica, lead and asbestos. Easy to breathe through.
  • 3M 2097: The same high protection as the 2091, plus a carbon layer that reduces nuisance-level odours and ozone. Popular for welding, where fumes and smells are a problem.

Prefilters & Retainers

These are used together with gas cartridges, when workers face both vapours and dust or mist.

  • 3M 5N11 Prefilter: A flat N95 filter pad that sits on top of a gas cartridge. It catches dust and paint mist before it reaches the cartridge, so the cartridge lasts longer. It’s also low cost to replace.
  • 3M Filter Retainer: The plastic cap that holds the 5N11 prefilter in place on the cartridge. [Writer: confirm the retainer model, e.g. 3M 501.]

How They Fit Together

  • Dust or fumes only: Clip a 2091 or 2097 filter straight onto the mask.
  • Vapours plus dust or mist (e.g. spray painting): Fit a gas cartridge, place a 5N11 prefilter on top and hold it with the filter retainer.

These filters fit 3M 6000, 6500 and 7500 half masks and the 3M 6800 full face mask in our reusable respirators range. Always fit filters in pairs.

How to Choose the Right Filter

  1. Check the hazard: Dust or fumes only → 2091. Welding fumes with smells → 2097. Vapours plus mist → cartridge + 5N11 + retainer.
  2. Check your mask: These filters fit 3M reusable masks only.
  3. Pick the right level: P100 filters give the highest protection for fine or toxic dust.
  4. Think about comfort: The light 2091 is easy to breathe through on long shifts in the heat.
  5. Stock spares: Keep extra filters and prefilters on site so workers can change them when needed.

When to Change Filters

  • Harder to breathe: Change P100 filters when breathing through the mask gets harder.
  • Damaged or dirty: Change them if they are wet, crushed or visibly dirty.
  • Prefilters: Change the 5N11 more often than the cartridge underneath, as soon as it looks dirty or clogged.
  • Replace in pairs: Always change both filters at the same time.
  • Storage: Keep spare filters sealed, in a cool, dry place.

Why Buy Particulate Filters from SAMS Solutions

  • Genuine 3M filters: Original 3M 2091, 2097, 5N11 and retainers.
  • Fit advice: We help you match filters to your masks and hazards.
  • Ready stock: In stock in Deira, Dubai, with fast delivery to Oman.
  • Wholesale prices: Better prices on boxes for teams and long projects.
  • Masks, cartridges and filters together: Order your full setup in one go.

Particulate Filters FAQs

Get in touch

Request a Quote

Not sure which filter fits your mask? Our safety team is happy to help. Call +971 56 409 8879 or WhatsApp +971 56 414 5969.

Login